Vacuum Casting TPU(White)
Usługa druku 3D online
Otrzymaj natychmiastowe oferty online na części w ponad 80 metalowych i plastikowych materiałach. Darmowa dostawa na wszystkie zamówienia z USA. Certyfikat ISO 9001:2015, ISO 13485 i AS9100D.Rozpocznij nową wycenę druku 3D
Typ pliku: STL, STP, STEP
Prywatność: Wszystkie Twoje pliki są u nas bezpieczne. Przeczytaj naszą politykę prywatności.
Vacuum Casting TPU(White)
Excellent elasticity, good tensile strength and tear resistance
MechanicalProperties
Hardness:0-100A(customizable) Shrinkage:0.8-1.3% SpecificGravity:1.2-1.4
ThermalProperties
HeatResistance:70-80℃ Low-TempResistance:-10℃(brittlepoint) MoldingTemp:140-180℃
ElectricalProperties
DielectricConstant(60Hz):4.2
Max. Part Size:
900mm × 650mm × 600mm
Tolerance and Precision：
±250μm or ±0.25%
Advantages
① 30A-90A hardness selection
② Superior tear resistance
③ Good ozone & cold resistance
④ Suitable for large casting parts
Disadvantages
① Not resistant to concentrated solvents
② Not for oil contact applications
③ Incompatible with NaOH solution
① 30A-90A hardness selection
② Superior tear resistance
③ Good ozone & cold resistance
④ Suitable for large casting parts
Disadvantages
① Not resistant to concentrated solvents
② Not for oil contact applications
③ Incompatible with NaOH solution
Vacuum Casting TPU(Transparent)
Excellent elasticity, good tensile strength and tear resistance
MechanicalProperties
ShoreHardness:0–100A Toughness:Good ShrinkageRate:0.8–1.3% SpecificGravity:1.2–1.4
ThermalProperties
HeatResistance:70–80°C Low-TemperatureResistance(BrittlePoint):-10°C MoldingTemperature:140–180°C
ElectricalProperties
DielectricConstant(60Hz):4.2
Max. Part Size:
900mm × 650mm × 600mm
Tolerance and Precision：
±250μm or ±0.25%
Advantages
① Good elasticity
② Reliable tensile and tear strength
③ Cold and ozone resistant
Disadvantages
① Soluble in most concentrated solvents
② Not suitable for oils or NaOH solutions
① Good elasticity
② Reliable tensile and tear strength
③ Cold and ozone resistant
Disadvantages
① Soluble in most concentrated solvents
② Not suitable for oils or NaOH solutions
Vacuum Casting TPU(Colorful)
Excellent elasticity, good tensile strength and tear resistance
MechanicalProperties
ShoreHardness:0–100A Toughness:Good Shrinkage:0.8–1.3% Density:1.2–1.4
ThermalProperties
HeatResistance:70–80℃ LowTempResistance:-10℃ MoldingTemp:140–180℃
ElectricalProperties
DielectricConstant:4.2(60Hz)
Max. Part Size:
900mm × 650mm × 605mm
Tolerance and Precision：
±250μm or ±0.25%
Advantages
①Goodelasticity
②Reliabletensileandtearstrength
③Coldandozoneresistance
Disadvantages
①Colorvariationupto±25%
②NotsuitableforoilsorNaOHsolutions
③Solubleinmostconcentratedsolvents
④Heatresistanceupto80℃
①Goodelasticity
②Reliabletensileandtearstrength
③Coldandozoneresistance
Disadvantages
①Colorvariationupto±25%
②NotsuitableforoilsorNaOHsolutions
③Solubleinmostconcentratedsolvents
④Heatresistanceupto80℃
Excellent elasticity, good tensile strength and tear resistance
MechanicalProperties
ShoreHardness:0-100A Toughness:Good Shrinkage:0.8-1.3% Density:1.2-1.4
ThermalProperties
HeatResistance:70-80℃ LowTempResistance:-10℃ MoldingTemp:140-180℃
ElectricalProperties
DielectricConstant:4.2(60Hz)
Max. Part Size:
900mm × 650mm × 607mm
Tolerance and Precision：
±250μm or ±0.25%
Advantages
① Good elasticity
② Reliable tensile and tear strength
③ Cold and ozone resistance
Disadvantages
① Color variation up to ±25%
② Not suitable for oils or NaOH solutions
③ Soluble in most concentrated solvents
④ Heat resistance up to 80℃
① Good elasticity
② Reliable tensile and tear strength
③ Cold and ozone resistance
Disadvantages
① Color variation up to ±25%
② Not suitable for oils or NaOH solutions
③ Soluble in most concentrated solvents
④ Heat resistance up to 80℃
A low-viscosity, easy-to-use polyurethane resin with excellent mechanical properties, ideal for prototypes similar to ABS thermoplastics.
ThermalProperties
GlassTransitionTemp:85℃
MechanicalProperties
TensileStrength:50MPa LinearShrinkage:2% FlexuralModulus:1800MPa FlexuralStrength:75MPa ImpactStrength:60KJ/m² ShoreHardness:78D
ProcessingProperties
MaxCastingThickness:10mm FullCureTime(23℃):4days
Max. Part Size:
900mm × 650mm × 609mm
Tolerance and Precision：
±500μm or ±0.5%
Advantages
① Smoother surface finish than 3D prints
② Excellent strength and thermal resistance
① Smoother surface finish than 3D prints
② Excellent strength and thermal resistance
Vacuum Casting PA
A transparent, easy-to-process, easy-to-demold, low-shrinkage polyurethane resin with mechanical properties similar to nylon.
Max. Part Size:
900mm × 650mm × 611mm
Tolerance and Precision：
±500μm or ±0.5%
Advantages
① High strength
② Excellent heat resistance
① High strength
② Excellent heat resistance
Vacuum Casting PC
A transparent, easy-to-process, easy-to-demold, low-shrinkage polyurethane resin with mechanical properties similar to polycarbonate (PC)
ThermalProperties
HeatDeflectionTemp:50–60℃
MechanicalProperties
TensileStrength:55MPa LinearShrinkage:3mm/m FlexuralModulus:1500MPa FlexuralStrength:90MPa ImpactStrength:50KJ/m² ShoreHardness:78D ElongationatBreak:16%
ProcessingProperties
MaxCastingThickness:5mm FullCureTime(at23℃):4days
Max. Part Size:
900mm × 650mm × 613mm
Tolerance and Precision：
±500μm or ±0.5%
Advantages
① Smoother surface finish than 3D prints
② Great combination of hardness and toughness
① Smoother surface finish than 3D prints
② Great combination of hardness and toughness
A vacuum casting material developed for producing PE and PP-like prototypes. It delivers a tactile feel and appearance similar to PE/PP parts.
ThermalProperties
HeatDeflectionTemp:70℃
MechanicalProperties
TensileStrength:34MPa LinearShrinkage:3mm/m FlexuralModulus(Young’s):960MPa FlexuralStrength:39MPa ImpactStrength:10KJ/m² ShoreHardness:76D ElongationatBreak:72%
Max. Part Size:
900mm × 650mm × 615mm
Tolerance and Precision：
±500μm or ±0.5%
Advantages
① Excellent toughness
② Long service life
③ Ideal for molding large-size parts
① Excellent toughness
② Long service life
③ Ideal for molding large-size parts
Vacuum Casting POM
A transparent, easy-to-process, easy-to-demold, low-shrinkage polyurethane resin with mechanical properties similar to POM.
ThermalProperties
HeatDeflectionTemp(HDT):84℃–100℃
MechanicalProperties
TensileStrength:60–73MPa LinearShrinkage:0.3% FlexuralModulus:1790–3400MPa FlexuralStrength:78–92MPa ImpactStrength:6–14KJ/m² Hardness:84–87D ElongationatBreak:0.8%–16%
Max. Part Size:
900mm × 650mm × 617mm
Tolerance and Precision：
±500μm or ±0.5%
Advantages
① High strength and rigidity
② Excellent dimensional stability
① High strength and rigidity
② Excellent dimensional stability
Vacuum Casting PMMA
A transparent, easy-to-process, easy-to-demold, low-shrinkage polyurethane resin with mechanical properties similar to acrylic (PMMA).
ThermalProperties
HeatDeflectionTemp(TMA):50℃–60℃
MechanicalProperties
TensileStrength(ISO527-84):55MPa LinearShrinkage:3mm/m FlexuralModulus(ISO178-93):1500MPa FlexuralStrength(ISO178-93):90MPa ImpactStrength(ISO179/ID-94):50KJ/m² Hardness(ISO868-85):78ShoreD ElongationatBreak(ISO37-77):13%
ProcessingProperties
MaxCastingThickness:5mm FullCureTime(at23℃):4days
Max. Part Size:
900mm × 650mm × 619mm
Tolerance and Precision：
±500μm or ±0.5%
Advantages
① Smoother surface finish than 3D prints
② Excellent balance of hardness and toughness
① Smoother surface finish than 3D prints
② Excellent balance of hardness and toughness