Vacuum Casting TPU(White)
آن لائن ڈی پرنٹنگ سروس
80 سے زیادہ دھاتوں اور پلاسٹک مواد میں حصوں پر آن لائن فوری کوٹ حاصل کریں۔ تمام امریکی آرڈرز پر مفت شipping۔ آئی ایس او 9001:2015، آئی ایس او 13485 اور اے ایس 9100ڈ سرٹیفائیڈ۔ایک نیا ڈی پرنٹنگ کوٹ شروع کریں
فائل کی قسم: اسٹی ایل، اسٹی پی، اسٹپ
پرائیویسی: آپ کی تمام فائلیں ہمارے پاس محفوظ ہیں۔ ہمارے پرائیسی پالیسی پڑھیں۔
Vacuum Casting TPU(White)
Excellent elasticity, good tensile strength and tear resistance
MechanicalProperties
Hardness:0-100A(customizable) Shrinkage:0.8-1.3% SpecificGravity:1.2-1.4
ThermalProperties
HeatResistance:70-80℃ Low-TempResistance:-10℃(brittlepoint) MoldingTemp:140-180℃
ElectricalProperties
DielectricConstant(60Hz):4.2
Max. Part Size:
900mm × 650mm × 600mm
Tolerance and Precision：
±250μm or ±0.25%
Advantages
① 30A-90A hardness selection
② Superior tear resistance
③ Good ozone & cold resistance
④ Suitable for large casting parts
Disadvantages
① Not resistant to concentrated solvents
② Not for oil contact applications
③ Incompatible with NaOH solution
① 30A-90A hardness selection
② Superior tear resistance
③ Good ozone & cold resistance
④ Suitable for large casting parts
Disadvantages
① Not resistant to concentrated solvents
② Not for oil contact applications
③ Incompatible with NaOH solution
Vacuum Casting TPU(Transparent)
Excellent elasticity, good tensile strength and tear resistance
MechanicalProperties
ShoreHardness:0–100A Toughness:Good ShrinkageRate:0.8–1.3% SpecificGravity:1.2–1.4
ThermalProperties
HeatResistance:70–80°C Low-TemperatureResistance(BrittlePoint):-10°C MoldingTemperature:140–180°C
ElectricalProperties
DielectricConstant(60Hz):4.2
Max. Part Size:
900mm × 650mm × 600mm
Tolerance and Precision：
±250μm or ±0.25%
Advantages
① Good elasticity
② Reliable tensile and tear strength
③ Cold and ozone resistant
Disadvantages
① Soluble in most concentrated solvents
② Not suitable for oils or NaOH solutions
① Good elasticity
② Reliable tensile and tear strength
③ Cold and ozone resistant
Disadvantages
① Soluble in most concentrated solvents
② Not suitable for oils or NaOH solutions
Vacuum Casting TPU(Colorful)
Excellent elasticity, good tensile strength and tear resistance
MechanicalProperties
ShoreHardness:0–100A Toughness:Good Shrinkage:0.8–1.3% Density:1.2–1.4
ThermalProperties
HeatResistance:70–80℃ LowTempResistance:-10℃ MoldingTemp:140–180℃
ElectricalProperties
DielectricConstant:4.2(60Hz)
Max. Part Size:
900mm × 650mm × 605mm
Tolerance and Precision：
±250μm or ±0.25%
Advantages
①Goodelasticity
②Reliabletensileandtearstrength
③Coldandozoneresistance
Disadvantages
①Colorvariationupto±25%
②NotsuitableforoilsorNaOHsolutions
③Solubleinmostconcentratedsolvents
④Heatresistanceupto80℃
①Goodelasticity
②Reliabletensileandtearstrength
③Coldandozoneresistance
Disadvantages
①Colorvariationupto±25%
②NotsuitableforoilsorNaOHsolutions
③Solubleinmostconcentratedsolvents
④Heatresistanceupto80℃
Excellent elasticity, good tensile strength and tear resistance
MechanicalProperties
ShoreHardness:0-100A Toughness:Good Shrinkage:0.8-1.3% Density:1.2-1.4
ThermalProperties
HeatResistance:70-80℃ LowTempResistance:-10℃ MoldingTemp:140-180℃
ElectricalProperties
DielectricConstant:4.2(60Hz)
Max. Part Size:
900mm × 650mm × 607mm
Tolerance and Precision：
±250μm or ±0.25%
Advantages
① Good elasticity
② Reliable tensile and tear strength
③ Cold and ozone resistance
Disadvantages
① Color variation up to ±25%
② Not suitable for oils or NaOH solutions
③ Soluble in most concentrated solvents
④ Heat resistance up to 80℃
① Good elasticity
② Reliable tensile and tear strength
③ Cold and ozone resistance
Disadvantages
① Color variation up to ±25%
② Not suitable for oils or NaOH solutions
③ Soluble in most concentrated solvents
④ Heat resistance up to 80℃
A low-viscosity, easy-to-use polyurethane resin with excellent mechanical properties, ideal for prototypes similar to ABS thermoplastics.
ThermalProperties
GlassTransitionTemp:85℃
MechanicalProperties
TensileStrength:50MPa LinearShrinkage:2% FlexuralModulus:1800MPa FlexuralStrength:75MPa ImpactStrength:60KJ/m² ShoreHardness:78D
ProcessingProperties
MaxCastingThickness:10mm FullCureTime(23℃):4days
Max. Part Size:
900mm × 650mm × 609mm
Tolerance and Precision：
±500μm or ±0.5%
Advantages
① Smoother surface finish than 3D prints
② Excellent strength and thermal resistance
① Smoother surface finish than 3D prints
② Excellent strength and thermal resistance
Vacuum Casting PA
A transparent, easy-to-process, easy-to-demold, low-shrinkage polyurethane resin with mechanical properties similar to nylon.
Max. Part Size:
900mm × 650mm × 611mm
Tolerance and Precision：
±500μm or ±0.5%
Advantages
① High strength
② Excellent heat resistance
① High strength
② Excellent heat resistance
Vacuum Casting PC
A transparent, easy-to-process, easy-to-demold, low-shrinkage polyurethane resin with mechanical properties similar to polycarbonate (PC)
ThermalProperties
HeatDeflectionTemp:50–60℃
MechanicalProperties
TensileStrength:55MPa LinearShrinkage:3mm/m FlexuralModulus:1500MPa FlexuralStrength:90MPa ImpactStrength:50KJ/m² ShoreHardness:78D ElongationatBreak:16%
ProcessingProperties
MaxCastingThickness:5mm FullCureTime(at23℃):4days
Max. Part Size:
900mm × 650mm × 613mm
Tolerance and Precision：
±500μm or ±0.5%
Advantages
① Smoother surface finish than 3D prints
② Great combination of hardness and toughness
① Smoother surface finish than 3D prints
② Great combination of hardness and toughness
A vacuum casting material developed for producing PE and PP-like prototypes. It delivers a tactile feel and appearance similar to PE/PP parts.
ThermalProperties
HeatDeflectionTemp:70℃
MechanicalProperties
TensileStrength:34MPa LinearShrinkage:3mm/m FlexuralModulus(Young’s):960MPa FlexuralStrength:39MPa ImpactStrength:10KJ/m² ShoreHardness:76D ElongationatBreak:72%
Max. Part Size:
900mm × 650mm × 615mm
Tolerance and Precision：
±500μm or ±0.5%
Advantages
① Excellent toughness
② Long service life
③ Ideal for molding large-size parts
① Excellent toughness
② Long service life
③ Ideal for molding large-size parts
Vacuum Casting POM
A transparent, easy-to-process, easy-to-demold, low-shrinkage polyurethane resin with mechanical properties similar to POM.
ThermalProperties
HeatDeflectionTemp(HDT):84℃–100℃
MechanicalProperties
TensileStrength:60–73MPa LinearShrinkage:0.3% FlexuralModulus:1790–3400MPa FlexuralStrength:78–92MPa ImpactStrength:6–14KJ/m² Hardness:84–87D ElongationatBreak:0.8%–16%
Max. Part Size:
900mm × 650mm × 617mm
Tolerance and Precision：
±500μm or ±0.5%
Advantages
① High strength and rigidity
② Excellent dimensional stability
① High strength and rigidity
② Excellent dimensional stability
Vacuum Casting PMMA
A transparent, easy-to-process, easy-to-demold, low-shrinkage polyurethane resin with mechanical properties similar to acrylic (PMMA).
ThermalProperties
HeatDeflectionTemp(TMA):50℃–60℃
MechanicalProperties
TensileStrength(ISO527-84):55MPa LinearShrinkage:3mm/m FlexuralModulus(ISO178-93):1500MPa FlexuralStrength(ISO178-93):90MPa ImpactStrength(ISO179/ID-94):50KJ/m² Hardness(ISO868-85):78ShoreD ElongationatBreak(ISO37-77):13%
ProcessingProperties
MaxCastingThickness:5mm FullCureTime(at23℃):4days
Max. Part Size:
900mm × 650mm × 619mm
Tolerance and Precision：
±500μm or ±0.5%
Advantages
① Smoother surface finish than 3D prints
② Excellent balance of hardness and toughness
① Smoother surface finish than 3D prints
② Excellent balance of hardness and toughness